How Long Does it Take for a Morton Water Softener to Recharge? (Brief Explanation)

All water softeners require regular maintenance in order to function properly. One important task that needs to be performed on a regular basis is recharging the unit. However, A Morton water softener recharge time typically varies depending on a number of factors.

Content show

In this blog post, we’ll take a closer look at how long it takes for a Morton water softener to recharge and provide some tips for ensuring your unit runs smoothly. So without further ado, let’s get started!

Water Softener Recharge/ Regeneration Phases:

There are five main phases involved in recharging a Morton water softener

Fill: This is the first phase and involves filling the unit with water.
Brining: During this phase, salt is added to the water in order to remove the hard minerals from the resin beads.
Brine Rinse: The brine rinse phase removes any residual salt from the unit.
Backwash: During the backwash phase, water is pumped through the unit in order to remove any dirt or debris that may have accumulated.
Fast Rinse: The final phase of the recharge process is the fast rinse, which ensures that all of the salt has been removed from the unit.

After Recharge Completion:

Once the recharge process is complete, your Morton water softener should be ready to go! However, it’s always a good idea to check the unit’s manual for any specific instructions that may apply to your model.

By following these simple tips, you can ensure that your Morton water softener will function properly for many years to come.

When Should I Manually Regenerate my Water Softener?

It is important to note that Morton water softeners typically have two types of regeneration settings: automatic and manual.

Automatic Regeneration occurs when the unit senses that the resin beads need to be recharged. This setting is generally recommended for most users, as it requires little to no input on your part.

Manual Regeneration: on the other hand, should only be used if the unit is not functioning properly. If you notice that your water quality has decreased or that the unit isn’t using salt as efficiently, as usual, it may be time to perform a manual regeneration.

Keep in mind that manual regenerations should only be performed when necessary, as they can put unnecessary strain on the unit.

What Happens When You Do not Regenerate Water Softener?

Warning Signs to Look for Water Softener Regeneration:

The most common side effect is an increase in salt consumption.
The unit will eventually stop working altogether. Because the resin beads will become clogged with hard minerals and dirt, making it impossible for the unit to remove these contaminants from your water.
Additionally, failing to regenerate your water softener can also lead to increased salt consumption and decreased water quality.
In some cases, it may even be necessary to replace the entire unit.
A decrease in water quality. Because the regeneration process can remove some of the good minerals from your water, along with the bad ones.

To Avoid These Problems:

It’s important to recharge your Morton water softener on a regular basis. We recommend doing this every two to three months, or as needed.

By following these simple tips, you can ensure that your Morton water softener will continue to provide you with quality water for many years to come.

Final Thoughts:

We hope this article has helped you understand Morton’s water softener recharge times and the importance of regeneration. Remember, by following these simple tips, you can keep your unit running smoothly for many years to come. Thanks for reading!

Frequently Asked Questions (FAQs)

What happens if a water softener runs out of salt?

If your water softener runs out of salt, it will slowly stop working. The unit will eventually stop removing hard minerals from your water, and the water quality will decrease. In some cases, it may even be necessary to replace the entire unit.

How often should you clean a water softener brine tank?

We recommend cleaning your water softener brine tank at least once a year. This will help to remove any dirt or debris that may have accumulated over time.

Why Does My Water Softener Not Regenerate?

The most common reason is that the unit is not set to the correct regeneration schedule. If your unit is not set to regenerate regularly, it will slowly stop working. Additionally, the unit may not regenerate if the salt level in the brine tank is too low.

Rate this post

Marry Nigah

Hi, I’m a clinical psychologist and inclined towards best buying practices for home and kitchen things. Critical towards choosing the best product and honest with my feedback. I’m a seasoned writer having more than 4 years of experience in multiple niches as well.

Please note: CharlieTrotters.com is reader supported. This page may contain affiliate links. If you buy a product or service through such a link we earn a commission at no additional cost to you.