How To Drain A Water Softener Resin Tank? (Why You Should Drain)

Suppose you own a water softener, then you must know how to drain a water softener resin tank. Sometimes the water softener stops working if the water is loaded too much on it. Moreover, you have to ensure the proper functioning of the water softener.

Content show

The softener will only function correctly only if you have enough resin beads. However, too much quantity of resin can block the water flow, and thus, your softener will not work. Therefore, you need to know how to drain a water softener resin tank.

Resign Tank in Water Softener play an Important Role and it also maintains efficiency and enables Proper Functioning. You Should Know A Good Resin Tank improves the Productivity of Water Softener

This guide will show you how to drain a water softener resin tank step by step so that you can maintain it properly.

What Is A Water Softener Resin Tank?

The water softener resin tank is a chamber that contains the resin beads. The beads are responsible for exchanging the hardness-causing ions with sodium ions. As a result, the water becomes soft.

However, over time the resin beads become exhausted and need to be replaced. Moreover, if there is too much water loaded on the beads, they will become clogged. As a result, the water flow will be blocked, and your water softener will not work.

Why Do You Need To Drain The Water Softener Resin Tank?

As we have mentioned before, if there is too much water loaded on the beads, they will become clogged. As a result, the water flow will be blocked, and your water softener will not work.

Moreover, the resin beads need to be replaced from time to time as they become exhausted. Therefore, you need to know how to drain a water softener resin tank so that you can maintain it properly.

When Should You Drain The Water Softener Resin Tank?

You should drain the water softener resin tank when

The beads are clogged, and the water flow is blocked.
The beads need to be replaced as they have become exhausted.
You want to clean the resin tank.

How To Drain A Water Softener Resin Tank?

Follow the steps given below to drain a water softener resin tank:

Use A Bucket:

The first thing you need to do is to take a bucket. Place the bucket under the resin tank so that the water can be collected in it.

Use A Wet-Dry Vacuum:

If you do not have a bucket, you can use a wet-dry vacuum to collect the water. However, make sure that the vacuum is designed for wet conditions.

Turn Off The Water Supply:

Now, you need to turn off the water supply to the resin tank. You will find a valve on the pipe that supplies water to the tank. Turn the valve so that the water flow is stopped.

Open The Drain Valve:

Now, you need to find the drain valve. The drain valve is usually located at the bottom of the resin tank. Once you have found it, open it so that the water can start draining out.

Allow The Water To Drain Completely:

Let the water drain completely from the tank. It is important to ensure that all the water has been drained out. Otherwise, the beads will not be properly cleaned, and they will become clogged again.

Close The Drain Valve:

Once all the water has been drained out, close the drain valve.

Consequences If The Water Softener Isn’t Drained Correctly

If the water softener isn’t drained correctly, the beads will not be properly cleaned, and they will become clogged again. As a result, the water flow will be blocked, and your water softener will not work.

Moreover, the resin beads need to be replaced from time to time as they become exhausted. Therefore, you need to know how to drain a water softener resin tank so that you can maintain it properly.

How Often Should You Drain The Water Softener Resin Tank?

You should drain the water softener resin tank every 3 to 4 months. This will ensure that the beads are properly cleaned and do not become clogged. Moreover, it will also prolong the life of the resin beads.

What Causes A Water Softener Resin Tank To Become Clogged?

There are several factors that can cause a water softener resin tank to become clogged. These include:

Hard water:

Hard water contains high levels of calcium and magnesium ions. These ions can deposit on the resin beads and clog them.

Organic matter:

Organic matter such as leaves and twigs can also clog the resin beads.

Silt:

Silt can also deposit on the resin beads and clog them.

Rust:

Rust from the pipes can also deposit on the resin beads and clog them.

How To Prevent A Water Softener Resin Tank From Becoming Clogged?

Water Softener Resin Tank To Become Clogged

There are several things you can do to prevent a water softener resin tank from becoming clogged. These include:

Install a sediment filter:

You should install a sediment filter on the incoming water line. This will remove the sediments from the water and prevent them from clogging the resin beads.

Use distilled water:

You can also use distilled water for your water softener. This will remove the minerals from the water and prevent them from clogging the resin beads.

Clean the tank regularly:

You should also clean the resin tank regularly to prevent it from becoming clogged.

Conclusion:

So, now you know how to drain a water softener resin tank. You also know the consequences of not draining it correctly and how to prevent the tank from becoming clogged.

Follow the tips given in this article, and you will be able to maintain your water softener properly. If you follow the instructions in a right way then it is very easy draining process for you.

Frequently Asked Questions (FAQs)

Can you drain a water softener outside?

Yes, you can drain a water softener outside. However, make sure that the drain hose is properly connected, and there are no leaks.

Can you put bleach in a water softener?

No, you should not put bleach in a water softener as it will damage the resin beads.

How often should I clean my water softener?

You should clean your water softener every 3 to 4 months. This will ensure that the resin beads are properly cleaned and do not become clogged. Moreover, it will also prolong the life of the resin beads.

How often should you change the resin in a water softener?

You should change the resin in a water softener every 5 to 7 years. This will ensure that the water softener is working properly and the water is softened correctly.

What are the consequences of not draining a water softener?

If a water softener is not drained correctly, the beads will not be properly cleaned, and they will become clogged. Moreover, the water flow will be blocked, and your water softener will not work. Therefore, it is important to drain a water softener correctly.

Rate this post

Ashbal

Please note: CharlieTrotters.com is reader supported. This page may contain affiliate links. If you buy a product or service through such a link we earn a commission at no additional cost to you.